Ti-6Al-4V, also known as Grade 5 Titanium, is the most widely used titanium alloy, combining excellent strength, corrosion resistance, and low weight. It contains approximately 6% aluminum and 4% vanadium, which significantly enhance its mechanical and thermal properties compared to commercially pure titanium.

⭐ Key Features:

  • High Strength-to-Weight Ratio
    Comparable to some steels but at nearly half the weight.
  • Excellent Corrosion Resistance
    Resistant to seawater, chloride, and chemical corrosion.
  • Outstanding Biocompatibility
    Safe for long-term use in the human body.
  • Good Creep & Fatigue Resistance
    Maintains strength under cyclic and high-temperature stress.
  • Weldable and Machinable
    Suitable for forging, welding, and CNC machining with proper tooling.

📐 Technical Specifications – Ti-6Al-4V

Property

Value

Composition

Ti-6%Al-4%V

Density

4.43 g/cm³

Yield Strength (0.2% offset)

≥ 880 MPa (128 ksi)

Ultimate Tensile Strength

≥ 950 MPa (138 ksi)

Modulus of Elasticity

~114 GPa (16.5 million psi)

Hardness (Rockwell C)

~36 HRC

Elongation at Break

≥ 10%

Melting Point

~1600°C (2900°F)

Operating Temperature

Up to 400°C (752°F)

Standards

ASTM B348, AMS 4928, ISO 5832-3

🔍 Ti-6Al-4V vs. Commercially Pure Titanium (Grade 2)

Property

Ti-6Al-4V (Grade 5)

CP Titanium (Grade 2)

Density

4.43 g/cm³

4.51 g/cm³

Yield Strength

~880 MPa

~275 MPa

Tensile Strength

~950 MPa

~345 MPa

Hardness

~36 HRC

~15–20 HRC

Corrosion Resistance

Excellent

Superior (slightly better)

Weldability

Good

Excellent

Biocompatibility

Excellent

Excellent

Machinability

Moderate

Better than Ti-6Al-4V

Cost

Higher

Lower

✅ Conclusion:
Ti-6Al-4V is significantly stronger and more temperature-resistant than CP Titanium, making it ideal for load-bearing, high-performance applications. CP Titanium, while softer and more ductile, remains the better choice for corrosion-dominated, low-stress environments.

🛠 Common Applications of Ti-6Al-4V:

  • Aerospace:
    Jet engine components, airframes, landing gear, fasteners.
  • Medical Devices:
    Orthopedic implants (hip/knee), dental implants, surgical tools.
  • Automotive & Racing:
    High-performance engine parts, suspension components.
  • Marine Engineering:
    Boat shafts, propeller systems, underwater housings.
  • Industrial Equipment:
    Heat exchangers, pressure vessels, chemical processing components.

At Edgetech Industries, we supply Ti-6Al-4V titanium alloys in a variety of forms: rods, plates, bars, sheets, tubes, wires, and 3D printing powders, all certified to international quality standards. Contact us to learn more or request a quote.