There are three types of titanium mesh by manufacturing method: weaved mesh, stamped mesh, and expanded mesh.

Titanium expanded mesh is expanded from titanium sheets, the openings are normally diamond. It is used as an anode in many fields. Titanium mesh is usually coated with metal oxide and metal mixture oxide coated (MMO coated) such as RuO2/IrO2 coated anode, or platinized anode. These mesh anodes are used for cathode protection. Different coatings are used for different circumstances. The coating process is plating and brushing, depending on coating materials and manufacturing methods from different shops.

Titanium mesh (expanded mesh) is made by expanding sheet, which is ASTM B265 specified commercial pure titanium sheet. The strength of alloyed titanium is too high to be stamped or expanded. The width of the mesh we can provide will be the same as the sheet, the length of the stamped mesh is the same as the sheet while the length of the expanded mesh depends on the opening & sheet size.

Titanium has two most useful properties, unique corrosion resistance and the highest strength-to-weight ratio of any metal. Titanium materials can be used in many fields, such as chemical and electronic industry. Titanium mesh is mostly used as titanium anode and filter elements in chlor-alkali industry and other chemistry industries.

Specifications for our titanium mesh

Item Name

Titanium Expanded Mesh

Material

Gr1, Gr2 (CP Ti)

Processing

Expanded

Opening

Diamond Openings, per following specifications

Overall size

Per following specifications

Opening size and mesh overall size for titanium expanded mesh

Sheet Thickness

Width x Length

Mesh Open Size

Mesh Stem

0.3mm ~0.8mm

0.8mm~2.0mm

1000mm x 2000mm

1000mm x 3000mm

50mm x 25mm

2.0mm

20mm x 10mm

2.0mm

20mm x 7mm

2.0mm

16mm x 8mm

1.5mm-2.0mm

15mm x 5.5mm

1.5mm-2.0mm

13mm x 7mm

1.5mm-2.0mm

12.5mm x 4.5mm

1.5mm-2.0mm

12.5mm x 6mm

1.5mm-2.0mm

10mm x 5mm

<1.0mm

8mm x 5mm

<0.8mm

6mm x 3mm

<0.6mm

4.6mm x 2.5mm

<0.6mm

4mm x 3mm

<0.3mm

3mm x 2mm

<0.3mm

The listed opening size will be limited by sheet thickness and final mesh thickness. Titanium expanded mesh can be provided as flattened and unflattened, it will be supplied as un-flattened if no special requirement.

EXPANDED MESH – TYPE A: STANDARD EXPANDED MESH

It is the original and most popular type of expanded mesh with the familiar diamond shaped opening. The strands are turned at a sharp angle to the plane of the sheet giving a dimensional appearance to the finished material. The final mesh thickness will be larger than raw sheet thickness.

EXPANDED MESH – TYPE B: FLATTENED EXPANDED MESH

It is produced by passing standard mesh through heavy rolls that flat- ten the strands and bridges to pro- vide an overall level surface. This process, which reduces the original thickness by approximately one gauge, delivers a product particularly suited to applications where a slidable surface is required. The final mesh thickness will be the same as raw titanium sheet thickness.

Titanium mesh2
Titanium Mesh
Mesh
Titanium Expanded Mesh
Titanium mesh packing
Titanium Mesh Packing
Titanium Mesh with Joints
Titanium Mesh Article
Titanium mesh anode Ru
Mesh Anode
Titanium Mesh Packing (2)
Titanium Packing

We can provide titanium sheet mesh which is expended from titanium sheet, titanium wire mesh that is weaved by titanium wire, and titanium stamped mesh with circular holes, minimum opening is 1mm diameter. Titanium mesh baskets and MMO mesh anodes made from titanium mesh are also available.

Besides the listed specifications, other opening sizes and dimensions can be customized. We also provide titanium mesh with square and rectangle openings besides diamond opening mesh. A thin titanium mesh of 0.1mm is available now. Please send your specifications to sales@edge-techind.com.